Ludowici Screens and Feeders

SCREENS
Ludowici supply a full range of screen media and consumables to complement the world-class screen machines that they manufacture. Whether your requirements be for polyurethane, wedgewire, wire mesh or rubber, Ludowici are able to supply it.

FEATURES OF HORNET HEAVY DUTY BANANA SCREENS
• Capable of operation at up to 50% increased capacity over conventional horizontal screens.
• All major components are computer generated ensuring spare parts will fit with ease.
• High "G" force performance provides increased capacities and efficient desliming or media recovery.
• Deck cross-members are individually bottled for ease of replacement.
• Linear motion (straight-line) provided by the reliable Honert Exciter featuring the flexibility of in-situ stroke adjustment to the screen.
• Integral feed box and discharge lip form part of the screen deck.
• Suitable for modular wedge wire or polyurethane screen surfaces.
• Full continuous fillet welding and stress-relieving of all major component parts.
• Fully Huck-bolted on assembly
• Cross-members and drive beams are machined prior to assembly.
• Available in a wide range of sixes up to 14 ft. wide x 30 ft. long.
FEEDERS

PGM Vibrating Feeder 
Ludowici/Malco PGM Feeders are heavy-duty, high capacity vibrating feeders designed for use in arduous conditions such as primary materials handling applications. The PGM feeders are suitable for installations under large hoppers and can withstand head-loads and impact caused by large material lumps.
The feeder is driven by a twin-shaft, geared mechanism which delivers high "g" force and constant acceleration even under load, ensuring there is no capacity or throughput variation. A single, free-standing electric motor is connected to the mechanism either by a vee-belt drive arrangement or a cardan shaft.
Feeder installation is between horizontal to 10 degrees inclined and mounting is on heavy-duty steel coil springs.

Brute Force Feeder (BRU)
The Ludowici BRU Brute-Force Vibrating Feeders and Grizzly’s are your solution to troublesome primary crushing installations.
These machines are specifically designed to handle primary mineral streams containing maximum lump size of up to 1500 mm.
They are extremely robust and utilise heavy duty hard-faced liner panels, out of balance Exciter Mechanism drive units to ensure high ‘G’ force operation, and are installed on special heavy-duty rubber springs to minimize excessive movement caused by head-loads and impact.
The capacity range of these machines would be 500 – 4500 t/h.
Medium Duty Feeder (UF)
The Ludowici UF medium duty Vibrating Feeders are typically used to handle lighter minerals (coal, aggregate, sand, etc.) at feed rates ranging between 50 – 2500 t/h.
These feeders work best with relatively free-flowing and pre-sized (-250mm) material, delivering positive straight-line motion and consistency throughout due to high ‘G’ force operation.
The UF feeders are suitable for either floor mounting or cable suspension and come in sizes from 0.4m up to 3.3m wide and 0.75m to 5.0m in length.